Ultimate High Traffic Gloss Sealer
£29.99
Reviewed and recommended by the Guardian.
A professional and high quality Wet look Stone gloss sealer, suitable for interior residential homes, exterior patio slabs and high traffic areas. ie restaurants. Seals and leaves a long lasting gloss shine.
Give stone a natural looking hard wearing gloss shine this summer. This HIGH TRAFFIC gloss sealer leaves a natural shiny finish, for those who like that 'just rained on', or 'wet look' finish. It is suitable to use indoors and out, on all types of honed (non-shiny) paving slabs, patio slabs, natural stone, slate, brick, limestone, and honed smooth sandstone. This high quality gloss sealer is hard wearing and is designed for domestic and commercial premises where there is a low and high foot fall of traffic. You can apply with a brush or roller and allow to dry. It leaves a natural looking hard wearing shiny protection finish. The ideal way to brighten up your stone. On very rough stone it may leave a satin finish, but a further coat can be applied to suit.
We recommend cleaning with pre sealer cleaner before application of new sealers.
DIRECTIONS:
When applying ULTIMATE GLOSS SEALER
- Step 1 Stone must be clean and dry. This is very important, and we recommend the pre-sealer cleaner.
- Step 2 Apply a Coat of Stone Gloss sealer with a brush or roller.
- Be sure to work the sealer into the Stone.
Light walk on 4 hours. Cars 24 hours.
DO NOT APPLY SEALER UNLESS THE SURFACE IS COMPLETELY DRY AND NEUTRALIZED FROM ANY ACID USE.
1 litre covers 8 to 15 sq metres depending on porosity of stone.
IMPORTANT
This is NOT recommended on newly laid stone. Newly laid stone must be sealed with an impregnating sealer, such as Matt invisible or colour enhancer.
A professional and high quality Wet look Stone gloss sealer, suitable for interior residential homes, exterior patio slabs and high traffic areas. ie restaurants. Seals and leaves a long lasting gloss shine.
Give stone a natural looking hard wearing gloss shine this summer. This HIGH TRAFFIC gloss sealer leaves a natural shiny finish, for those who like that 'just rained on', or 'wet look' finish. It is suitable to use indoors and out, on all types of honed (non-shiny) paving slabs, patio slabs, natural stone, slate, brick, limestone, and honed smooth sandstone. This high quality gloss sealer is hard wearing and is designed for domestic and commercial premises where there is a low and high foot fall of traffic. You can apply with a brush or roller and allow to dry. It leaves a natural looking hard wearing shiny protection finish. The ideal way to brighten up your stone. On very rough stone it may leave a satin finish, but a further coat can be applied to suit.
We recommend cleaning with pre sealer cleaner before application of new sealers.
DIRECTIONS:
When applying ULTIMATE GLOSS SEALER
- Step 1 Stone must be clean and dry. This is very important, and we recommend the pre-sealer cleaner.
- Step 2 Apply a Coat of Stone Gloss sealer with a brush or roller.
- Be sure to work the sealer into the Stone.
Light walk on 4 hours. Cars 24 hours.
DO NOT APPLY SEALER UNLESS THE SURFACE IS COMPLETELY DRY AND NEUTRALIZED FROM ANY ACID USE.
1 litre covers 8 to 15 sq metres depending on porosity of stone.
IMPORTANT
This is NOT recommended on newly laid stone. Newly laid stone must be sealed with an impregnating sealer, such as Matt invisible or colour enhancer.
Copyright 2024
