Ultimate Gloss Sealer

£24.99

Reviewed and recommended by the Guardian.

Gives your Stone and Patio slabs a beautiful wet look finish, like that just rained on look. Give your patio a natural looking gloss shine.  Suitable for natural and man-made stone. For newly laid stone we recommend sealing with colour enhancer or invisible matt. leave for three months and then apply Ultimate gloss sealer over the top. Find them on our stone sealers page. Also available in high traffic gloss for those high traffic areas.

Size
Please choose a size
  Add to basket
We offer:
We offer payment cardsWe offer PayPal

Ultimate Gloss Sealer leaves a natural shiny finish appearance on smooth Paving slabs, patio slabs, stone, slate, Brick, limestone, etc.... This is suitable for residential homes and commercial use. For rough very porous stones, such as Sandstone and Indian Sandstone may leave a satin finish and not gloss as this is a topical sealer and must not be absorbed. If your stone is newly laid you must seal first with Matt Invisible or Stone Sealer and Enhancer and leave for a few months to allow salts to escape before applying any Gloss Sealer or Wet Look Sealer. Apply with a brush or roller and allow to dry, Leaves a natural looking hard wearing shiny, just rained on finish. The ideal way to brighten up your stone. If your stone is quite rough it may only leave a satin finish or you may need to apply further coats for a glossier finish.

REMOVES CEMENT AND MORTAR GROUT RESIDUE, LIME DEPOSIT, EFFLORESCENCE RESIDUES, AND OTHER HEAVY SOILING FROM ACID RESISTANT SURFACES.
A professional and high quality Wet look Stone gloss sealer, suitable for interior residential homes, exterior patio slabs and high traffic areas. ie ...
A colour intensifier that seals and enhances all in one. Ideal for all types of Natural Stone.
 

When applying ULTIMATE GLOSS SEALER


 

Step 1 Stone must be clean and dry.

Step 2 Apply Gloss sealer with a brush or roller,
Be sure to work the first coat into the Stone so the sealer penetrates onto the tile. Do not apply to thickly otherwise will not dry clear.

3 When touch dry apply a second light coat with brush or roller and let dry over night.

Allow 24 hours for the surface to cure. Light walk on traffic 4 hours

Extra coats will add to the depth of shine. 

DO NOT APPLY SEALER UNLESS THE SURFACE IS COMPLETELY DRY AND NEUTRALIZED FROM ANY ACID USE. IF YOU HAVE SANDSTONE OR JUST NOT SURE PLEASE CALL TECHNICAL ON 0207 193 0143

For use only on unpolished stone; above directions apply.

DO NOT LET PUDDLE ! If left to puddle; sealer will not dry clear.

1 litre covers 8 to 15 sq metres depending on porosity. 

 

0
Shopping Basket
X