Give Patios a natural looking gloss shine this summer. leaves a natural shiny finish appearance on Paving slabs, patio slabs, rough stone, slate, Brick, limestone, etc.... Choice of Standard and High Traffic. For sandstone we recommend High Traffic. If your stone is newly laid allow salts to come out before applying the sealer. Apply with a brush or roller and allow to dry, Leaves a natural looking hard wearing shiny protection finish. The ideal way to brighten up your stone.
Picture of Chinese slate on left.
Sample of gloss sealer on Slate black. click on image
DIRECTIONS: When applying ULTIMATE GLOSS SEALER
Step 1 Stone must be clean and dry.
Step 2 Apply Gloss sealer with a brush or roller,
Be sure to work the first coat into the Stone so the sealer penetrates onto the tile. Do not apply too thickly otherwise will not dry clear.
3 When touch dry apply a second light coat with brush or roller and let dry over night.
Allow 24 hours for the surface to cure. Light walk on traffic 4 hours.
Extra coats will add to the depth of shine.
DO NOT APPLY SEALER UNLESS THE SURFACE IS COMPLETELY DRY AND NEUTRALIZED FROM ANY ACID USE. IF YOU HAVE SANDSTONE OR JUST NOT SURE PLEASE CALL TECHNICAL ON 0207 193 0143
For use only on unpolished stone; above directions apply.
DO NOT LET PUDDLE ! If left to puddle; sealer will not dry clear.
1 litre covers 8 to 15 sq metres. To purchase 10 and 20 litres please contact us directly.
Available in 1, 5, 10 and 20 litre.
Select gloss or high gloss
Please contact us for more details.
The World of Sealers
Your Email has been sent
Your E-mail has been sent. We will be in contact with you soon.
Please refresh the page and re-submit the form.
Your content caused an error and your email has not been sent.
Please remove any unusual characters and try again